Email Call Message
🦃 THIS THANKSGIVING, PAY LESS FOR MEDICAL BILLING! Get Expert Medical Billing Services at Just 2.39%. Switch to One O Seven RCM & Start Saving Today! 🎁 Claim Your Deal Now! | Terms Apply.
🦃 THIS THANKSGIVING, PAY LESS FOR MEDICAL BILLING! Get Expert Medical Billing Services at Just 2.39%. Switch to One O Seven RCM & Start Saving Today! 🎁 Claim Your Deal Now! | Terms Apply.
🦃 THIS THANKSGIVING, PAY LESS FOR MEDICAL BILLING! Get Expert Medical Billing Services at Just 2.39%. Switch to One O Seven RCM & Start Saving Today! 🎁 Claim Your Deal Now! | Terms Apply.
🦃 THIS THANKSGIVING, PAY LESS FOR MEDICAL BILLING! Get Expert Medical Billing Services at Just 2.39%. Switch to One O Seven RCM & Start Saving Today! 🎁 Claim Your Deal Now! | Terms Apply.

Cardiology Billing Audit Checklist: 12 Revenue Leaks in Echo, Stress Testing, and Monitoring

Medical billing auditor reviewing cardiology claims and an ECG strip during a cardiology billing audit

Rules and figures checked against CMS, OIG, and payer sources as of November 16, 2026.

Scope: outpatient diagnostic billing for echocardiography, stress testing, and cardiac monitoring. Cath lab and structural heart billing follow different rules, so they aren’t covered here.

Most cardiology billing leaks in diagnostic testing never land on a denial report. You’ll find them as write-offs nobody questioned, add-on codes nobody billed, and short payments posted as if they were correct. A cardiology billing audit is how your team catches them before the money is gone for good.

Medicare tracks these errors too. CMS’s 2024 improper payment data puts echocardiography of the heart at a 7.6% improper payment rate, with $55.4 million in projected improper payments. That figure counts claims that didn’t meet Medicare rules. CMS states that it isn’t a fraud rate.

You’ll get 12 leaks across echo, stress testing, and cardiac monitoring. Each one comes with the rule behind it, the report to pull, the red flag to look for, and the fix. The rules reflect 2026 claims and the payment changes that start on January 1, 2027.

Key TakeawaysMost diagnostic leaks show up as write-offs, missed add-ons, or short payments, so a denial report alone won’t surface them.Echo leaks start in the report, such as a complete echo billed without both Doppler interpretations.Stress test leaks cluster around who performed each component and whether nuclear supply codes reached the claim.Some MACs deny overlapping ECG monitoring periods with no appeal rights, so check overlaps before you bill.Run the cardiology billing audit checklist in this guide every quarter and after each October 1 ICD-10 update.
In This GuideWhat Is a Cardiology Billing Audit?Why Echo, Stress Testing, and Monitoring Leak the MostHow to Run a Cardiology Billing Audit in Seven StepsEchocardiogram Billing Leaks (Leaks 1 to 4)Stress Test Billing Leaks (Leaks 5 to 8)Cardiac Monitoring Billing Leaks (Leaks 9 to 12)Leaks That Happen After the Claim LeavesWhat Changes for Cardiology Billing in 2027The Cardiology Billing Audit ChecklistWhen an Outside Audit Makes SenseFrequently Asked QuestionsHow We Sourced This Checklist

What Is a Cardiology Billing Audit?

A cardiology billing audit is a structured review that compares what your practice documented, what it billed, and what the payer paid. It finds coding errors, missed charges, unsupported claims, and underpayments, so you can recover revenue and fix the cause before a payer’s auditor finds the same problem.

What Counts as a Revenue Leak in Cardiology Billing

Revenue leakage in cardiology billing is money your practice earned and never collected. It takes four forms, and each one hides in a different report:

  • Never billed: the service happened, but no charge reached the claim.
  • Undercoded: the claim carries a lower code than the record supports.
  • Denied and dropped: nobody appealed before the deadline passed.
  • Underpaid: the payer paid less than your contracted rate.

Revenue leakage in healthcare tends to mean lost money, but an audit also catches the opposite problem. A claim billed above what the record supports is an overpayment, and Medicare expects it back. With good cardiology charge capture, your team bills what the record supports and stops there.

Why Most Leaks Never Show Up as Denials

A missing contrast code, a professional-only claim on equipment you own, or a short payment posted as correct all produce a clean-looking remittance. Nobody on the billing team gets an alert. Without an alert, nobody goes looking, and the same gap repeats on next month’s claims.

Documentation drives the rest of the risk. CMS measures it through the Comprehensive Error Rate Testing (CERT) program, and its CMS improper payment data puts the fiscal year 2025 fee-for-service rate at 6.55%, or $28.83 billion. Most of those cases, per CMS, involved records too thin for a reviewer to confirm the payment.

A denial worklist shows only the claims a payer rejected, and an audit looks at paid claims too. Our yearly billing audit checklist covers every payer. This guide goes deeper on cardiology billing and coding for diagnostic services, and practices that want outside eyes use medical billing audit services built around specialty rules.

Why Echo, Stress Testing, and Monitoring Leak the Most

Echo, stress testing, and cardiac monitoring leak the most because your practice bills them in high volume, splits them into professional and technical parts by setting, and has to meet coverage rules that demand specific documentation. A small error repeated on hundreds of claims costs more than one large error on a single procedure.

Three Traits That Make Diagnostic Claims Fragile

Three traits explain most cardiology billing errors in diagnostic testing, and each one sets up a leak you’ll see later in this guide:

  • Volume: your team bills the same codes many times a week, so one wrong default repeats on every claim.
  • Component splits: equipment ownership and the place of service decide which code and modifier apply.
  • Coverage rules: Medicare Administrative Contractor (MAC) policies and payer policies require the reason, the order, and the interpretation in the record.

Who Reviews Cardiology Diagnostic Claims in 2026 and 2027

Five types of reviewers look at diagnostic cardiology claims. They differ in what they check and in how close they get to a physician practice, so it helps to know which ones can request your records and which ones focus on hospital claims.

Who reviews cardiology diagnostic claims

ReviewerWhat it checksWhat it means for your practice
CERT (CMS)A random sample of paid claims, to measure improper paymentsHeart echo ran a 7.6% improper payment rate in the 2024 reporting period, per CMS echo compliance tips. CERT can request records from any practice.
Recovery Audit Contractors (RACs)CMS-approved topics, after paymentCMS RAC topic 0111 reviews transthoracic echo documentation, but it lists hospital and skilled nursing facility claims, not physician offices.
MACs, through Targeted Probe and Educate (TPE)A sample of one provider’s claims, followed by educationReviews practice claims and records.
HHS Office of Inspector General (OIG)Audits and evaluationsOIG’s RPM audit project checks whether providers furnished and billed remote patient monitoring the way Medicare requires.
Commercial payersPolicy edits and post-payment reviewFrequency limits and prior authorization rules vary by plan.

That’s why a cardiology billing audit starts with these three service lines. If a RAC or MAC letter is already on your desk, our guides on how RAC audits work and preparing for a Medicare audit cover the response side.

How to Run a Cardiology Billing Audit in Seven Steps

A cardiology billing audit runs in seven steps: set the scope, pull the reports, pick a sample, compare charts to claims, compare payments to contracts, trace each error to its source, and fix and recheck. If you find an overpayment along the way, a federal deadline applies.

Step 1: Set the Scope

Pick one service line, the payers you’ll review, and a date range. A retrospective audit looks at claims already paid, which is how you find leaks. Prospective audits check claims before they go out, which is how you stop new ones. Start retrospective, then add prospective checks once a pattern shows up.

Step 2: Pull Five Reports

Five reports give you almost everything the audit needs. Your billing system can produce each one, and together they show charges, denials, payments, and losses side by side:

  • Charge detail by CPT code, place of service, and modifier
  • Denials by claim adjustment reason code (CARC) and remark code (RARC)
  • Remittances compared with your contracted fee schedule
  • Ordered or scheduled tests compared with billed tests
  • Write-off adjustments by reason code

Step 3: Pick a Sample

Ten claims per provider per service line is enough to spot a pattern. It isn’t a statistically valid sample, and you shouldn’t treat it as one. If you need to calculate an overpayment for repayment, use a statistically valid method and bring in compliance counsel before you send money back.

One O Seven RCM working standard for audit samples

Practice sizeWorking sampleWhen to widen it
Solo cardiologist10 claims per service line per quarterTwo or more errors of the same type
Two to five providers10 claims per provider per service lineOne provider’s error repeats
Six or more providers10 claims per provider per service line, plus the top five codes by volumeAny repeated error

Step 4: Compare Each Chart to Its Claim

Line up the record against the claim: CPT code, every ICD-10-CM code, modifiers, place of service, signature, and retained images. Then check code pairs against CMS’s National Correct Coding Initiative (NCCI) edit files, which list pairs Medicare won’t pay together. A cardiology coding audit stops at this step.

Step 5: Compare Each Payment to the Contract

Re-price every paid line against the payer’s fee schedule and flag anything below it. A short payment never shows up on a denial report. You’ll only catch it when someone on your team sets each remittance next to the contract and compares the two.

Step 6: Trace Each Error to Where It Started

Map every error to its source: scheduling, authorization, order entry, the charge template, the EHR-to-billing interface, or the coder. If you correct the claim and leave the source alone, the same error comes back next month on a different patient’s claim.

Step 7: Fix, Retrain, Recheck, and Return Overpayments

Correct the claims still inside timely filing, retrain the person or fix the template, and re-audit the same codes in 90 days. Overpayments follow 42 CFR 401.305: you report and return them within 60 days of identifying them, or by the cost report due date if that’s later.

The rule pauses that clock while you run a timely, good-faith investigation, for up to 180 days after you first identify the overpayment. It reaches back six years from the date you received the payment. Treat this summary as orientation, not legal advice, and confirm your situation with counsel.

How Often to Audit

Cardiology billing guidelines change at least twice a year, so an annual audit leaves months of exposure between reviews. This schedule keeps each service line on a cycle that matches how fast its rules move:

  • Quarterly for high-volume echo and stress codes
  • Monthly for remote monitoring billing periods
  • After each October 1 ICD-10-CM update and January 1 CPT update
  • When a new provider, coder, EHR, or interface goes live
Want This Audit Run on Your Own Claims?Pulling five reports and working a sample takes hours your billing team may not have during a busy month. Our specialty billing audit team can run it with you and walk through every finding.Request a free audit →

Echocardiogram Billing Leaks (Leaks 1 to 4)

Echocardiogram billing leaks in four places: complete-echo codes the report doesn’t support, repeat studies without a documented reason, contrast and strain add-ons that never reach the claim, and the wrong component for the setting. Start your cardiology billing audit with echo, since it’s often the highest-volume diagnostic line.

Leak 1: CPT 93306 Billed Without a Complete Doppler Report

CPT 93306 is the complete transthoracic echo with both spectral and color flow Doppler. If the signed report lacks either Doppler interpretation, the claim isn’t supported, and a reviewer can take the payment back. Billing CPT 93308, the limited or follow-up study, for a documented complete exam underpays you instead.

The rule: AMA’s CPT descriptors define 93306, 93307, and 93308, and 93307 is a complete study without spectral or color Doppler. Color flow Doppler, CPT 93325, is already part of 93306, so it doesn’t go on the same claim. The echo with Doppler CPT code holds only when both Doppler types appear in the report.

Find it: pull every CPT 93306 from the last 90 days and sample by provider. Red flag: a report template missing a Doppler section, or an interpretation nobody signed. The fix: put a hard stop in the reporting template and have a coder compare Doppler fields against the code before the claim goes out.

Leak 2: Repeat Echos Without a Documented Change in Condition

A second or third transthoracic echocardiogram (TTE) in a year gets denied when the note doesn’t say what changed. The study may have been necessary, but the record has to show the reason in words a reviewer can point to, such as new symptoms or a change in therapy.

The rule: Cigna’s echocardiography policy doesn’t cover more than two TTEs in a rolling 12 months, outside listed exceptions. Medicare frequency rules sit in each MAC’s TTE coverage policy, so check your contractor’s version. Payers add limits here that cardiology coding guidelines never mention.

Find it: run a patient-level report of two or more TTE codes within 12 months. Red flag: a repeat order with no new symptoms, change in status, or change in therapy in the note. The fix: add a required “reason for repeat study” field to the order template, and check payer policy before you schedule.

Leak 3: Contrast and Strain Add-Ons That Never Reach the Claim

Your sonographer uses an ultrasound enhancing agent or runs strain imaging, the report says so, and the claim goes out without the add-on. Nothing gets denied. The payment never arrives, and nobody on the team notices that a charge is missing.

The rule: in the office, you report the agent with its HCPCS code, billed per mL: Q9950, Q9956, or Q9957, depending on the agent. ASE’s contrast coding guidance notes that hospitals use separate C-codes instead. CPT 93356, myocardial strain imaging, is an add-on reported once per session with an eligible echo code, and payer coverage varies.

Find it: search echo reports for “contrast,” the agent’s brand name, “strain,” or “GLS,” then match them against claims missing those codes. Red flag: a report that records an agent volume beside a claim with no Q-code. The fix: add a report-to-charge rule, which tightens cardiology charge capture at the source.

Leak 4: Professional and Technical Components Billed for the Wrong Setting

Component errors leak money in three directions. Billing the global echo code for a hospital study you only read gets denied. Appending -26 in your own office, on equipment you own, gives away the technical payment. Reads on a hospital worklist sometimes never become charges at all.

The rule: modifier 26 and TC follow equipment ownership and the place of service. Whoever owns the equipment and performs the study bills the technical component. Your reading physician bills the professional component, and the global code applies only when one practice does both.

Find it: run claims by place of service and modifier, then compare the reading physician’s worklist count with claims billed with -26. Red flags: -26 on place of service 11 claims, or global claims on facility places of service. The fix: build charge rules by place of service and reconcile worklists against charges each month.

Getting the echocardiogram CPT code right is the base layer for stress echo, where the same split-billing logic picks up a second layer: the stress test itself.

Stress Test Billing Leaks (Leaks 5 to 8)

Stress test billing leaks in four places: a global code billed when one physician didn’t do every component, stress echo codes paired the wrong way, nuclear studies missing their stress or supply codes, and documentation that misses coverage rules. In a cardiology billing audit, stress claims fail more often on component splits than on the code itself.

Leak 5: CPT 93015 Billed When Only Some Components Were Performed

CPT 93015 is the global stress test code. It covers supervision, the tracing, and the interpretation and report. Practices lose money two ways: billing 93015 for a hospital-based test, which gets denied, or billing one component in the office when the physician supervised and read the whole test.

The rule: AAPC’s stress test coding guidance says to report the global code only when the physician performs the complete test. In a facility, the hospital reports the technical component, and the physician reports the components performed, such as 93016 for supervision and 93018 for the interpretation.

Each stress test CPT code describes one component, and the treadmill stress test CPT code family runs from 93015 to 93018. These tests use component codes instead of modifier 26 and TC. Electrode setup, the injection of a pharmacologic agent, and routine ECG strips during the test are all included, so none of them gets its own line.

Find it: pull every 93015 by place of service. Red flags: 93015 on place of service 19, 21, 22, or 23, or a separate ECG code on the same date for the routine strips. The fix: let place of service drive global vs split billing in your charge rules, so stress test billing errors stop repeating.

Leak 6: Stress Echo Billed With the Wrong Code Pair

Stress echo has two codes, and the claim fails when the pair doesn’t match who did the work. CPT 93351 covers the stress echo plus the complete stress test by one physician, while CPT 93350 covers the stress echo alone, with the stress test reported by whoever performed it.

The rule: CPT Assistant limits 93351 to a stress echo combined with a complete cardiac stress test. In the office, when two physicians split the work, one reports 93350 and the other reports codes from 93016 to 93018. For facility studies, a physician who provides every professional component reports 93351 with modifier 26.

AAPC’s published guidance adds that 93016, 93018, and 93350-26 don’t belong on the same claim as 93351-26. Doppler add-ons can accompany a stress echo when the report documents them, subject to NCCI and payer edits.

Find it: the stress echo CPT code depends on who supervised, who read the ECG, and who read the images, so pull 93350 and 93351 with their companion codes. Red flags: 93351 alongside 93015 to 93018, or 93350 alone when one physician did everything. The fix: load a code-pair matrix into your claim scrubber.

Leak 7: Nuclear Stress Tests Missing the Stress Component or Supply Codes

A nuclear study billed with only CPT 78452 leaves money behind. The stress test components, the radiopharmaceutical, and the pharmacologic agent each need their own line when your practice performed the work or bought the supply. Missing lines don’t trigger denials, so the shortfall stays hidden until someone audits it.

The rule: the nuclear stress test CPT code covers the imaging, and the stress portion goes on separately from the 93015 series, as Loma Linda University Health’s cardiac lab codes show for SPECT studies. Isotopes bill per study dose, such as A9500 for Tc-99m sestamibi or A9502 for tetrofosmin.

Pharmacological stress test billing adds the drug. Regadenoson bills as J2785 per 0.1 mg, and a practice that pays for the agent reports the supply, while the injection stays part of the stress test. Some payers treat rest and stress images as one study dose, per AAPC’s nuclear medicine guidance, so check before you bill two.

The leak can run the other way too. In December 2024, 16 cardiology practices in 12 states agreed to pay $17,761,564 to resolve allegations that they reported inflated acquisition costs for diagnostic radiopharmaceuticals, according to the DOJ settlement announcement. Medicare contractors there had published guidance on reporting invoice costs.

Find it: pull every 78452 and look for a missing stress code, a pharmacologic study with no agent code, or a dose billed at a cost that doesn’t match the invoice. The fix: set up a nuclear charge bundle, file each invoice against each dose, and confirm prior authorization tracking before you schedule.

Leak 8: Documentation That Misses Coverage Rules or Uses Retired Diagnosis Codes

A stress claim can carry the right codes and still fail on review when the record doesn’t show why the test was ordered. MAC reviewers read the note first. If the reason for the test, the referral, or the choice of test isn’t written down, the codes can’t carry the claim on their own.

The rule: Noridian LCD L34324, which covers Jurisdictions JE and JF, limits coverage to a frequency that fits the patient’s condition. Annual testing without individualized indications isn’t covered, screening on risk factors alone isn’t covered, and a stress echo done alongside a perfusion study isn’t either.

Its billing article A57183 requires the record to show why the practice chose a stress echo over an ECG-only test, why it used a pharmacologic agent, and the referral order. Other MACs publish their own stress testing policies, so pull your contractor’s version before you audit.

The article’s revision effective October 1, 2026, deleted I42.0, I42.8, and I49.8, because those codes now need a more specific final character. Replacements include I42.00 (dilated cardiomyopathy, unspecified), I42.81 (arrhythmogenic cardiomyopathy), and I49.81 (Brugada syndrome).

Find it: flag stress claims dated on or after October 1, 2026, that still carry I42.0, I42.8, or I49.8. Flag repeat tests within 12 months that lack a documented change, too. The fix: update diagnosis pick-lists every October 1 and require the test’s reason and referral in the order template.

Stress Imaging Denied for a Missing Authorization?Nuclear and stress echo studies often need prior approval, and a denial after the test is hard to reverse. Our eligibility team checks each payer’s rules before your staff schedules the study.See prior authorization support →

Monitoring has the same weak points: documentation, component billing, and timing. The difference is that monitoring rules count billing periods in days, so a single wrong date can sink an otherwise clean claim.

Cardiac Monitoring Billing Leaks (Leaks 9 to 12)

Cardiac monitoring billing leaks in four places: overlapping monitoring periods, the wrong code family for the device or wear time, implanted-device periods billed early, twice, or never, and remote physiologic monitoring billed without its required parts. Most of these denials come down to dates, and a cardiology billing audit catches them by auditing periods.

Leak 9: Overlapping ECG Monitoring Periods

Overlapping ambulatory ECG services for one patient get the second claim denied, even if a different provider ordered it. Your practice may never learn the other monitor existed until the denial posts, and by then the patient has already worn the device and the read is done.

The rule: Noridian’s monitoring billing rules say monitoring sets can’t be completed within 29 days of each other. Noridian’s claims system checks Part A and Part B claims nationwide for overlaps, and these denials carry no appeal rights. Coverage falls under NCD 20.15, Electrocardiographic Services.

Find it: run a patient-level report of every monitoring code within 30 days, and ask the patient and referring office about any recent monitor before you bill. Red flag: two monitoring starts within 29 days. The fix: add an overlap question to scheduling and confirm the ordered service with the ordering provider, as Noridian advises.

Leak 10: The Wrong Code Family or Component for the Device and Wear Time

Billing a Holter code for a seven-day patch, or a global code when a vendor supplied the technical work, gets the claim denied or cut. The code family has to match the device type and how long the patient wore it, and the component has to match who did each part.

Ambulatory ECG code families and their windows

ServiceCodesWindow
HolterGlobal 93224; hook-up 93225; scanning analysis 93226; interpretation 93227Up to 48 hours
Extended external ECGGlobal CPT 93241, components 93242 to 93244; global 93245, components 93246 to 93248More than 48 hours up to 7 days (93241); more than 7 days up to 15 days (93245)
Event monitorGlobal CPT 93268; hook-up 93270; transmission and analysis 93271; interpretation 93272Up to 30 days
Mobile cardiac telemetry (MCT)Technical CPT 93229, hook-up included; professional CPT 93228Up to 30 days, no global code

The rule: AMA’s CPT descriptors set these windows, and Noridian’s table splits each family into technical, professional, and hook-up parts. Holter monitor billing covers only up to 48 hours. The event monitor CPT code family shares MCT’s 30-day window, yet the two describe different services.

Our guide to Holter monitor CPT 93224 covers the global Holter claim, and reads billed alone use the Holter interpretation code 93227.

Find it: compare wear time in the report with the code family billed, and match your claims against vendor invoices. Red flag: a global code on a claim where the vendor billed the technical part. The fix: key charge rules to device type and wear duration.

For diagnosis support, our bradycardia ICD-10 coding guide covers slow rhythms, and the tachycardia ICD-10 codes guide covers fast ones.

Leak 11: Implanted-Device Monitoring Periods Billed Early, Twice, or Never

Implanted-device remote monitoring pays by period, and practices lose money three ways. Transmissions arrive but nobody bills the period. A biller sends the claim before the period ends. Another claim lands inside a period that’s already paid, and the payer denies the duplicate.

The rule: remote interrogation codes for pacemakers and defibrillators cover up to 90 days, and you report them once per period. Code 93294 is the pacemaker professional service, 93295 the defibrillator professional service, and 93296 the technical support for both. Remote checks of implantable monitors (93297) and loop recorders (CPT 93298) cover up to 30 days.

Code 93296 carries no physician work value. It pays for the technical support your staff provides, so bill it only when your practice furnished that support rather than a manufacturer or vendor service.

Find it: remote device monitoring billing needs a roster of every device patient with code family, period start, and period end. Reconcile billed periods against transmission logs and signed interpretations each month. Red flag: transmissions that kept arriving through a period nobody billed. The fix: give one person ownership of the roster.

Nobody Owns Your Device-Clinic Roster?Remote monitoring periods slip through when tracking lives in a spreadsheet nobody updates. Our team can take that work on as part of full cardiology revenue cycle management, alongside coding, claims, and follow-up.See cardiology RCM services →

Leak 12: Remote Physiologic Monitoring Billed Without All Its Required Parts

Remote patient monitoring (RPM) claims for heart failure and hypertension patients turn into recovery risk when the record can’t show device supply days, the patient interaction, and treatment management time. Auditors look for all three in the same month, and a missing piece can unwind the claim.

The rule: OIG’s 2024 RPM evaluation found that about 43% of enrollees who got RPM in 2022 lacked a record for at least one of its three components. Enrollment grew from about 55,000 in 2019 to over 570,000 in 2022, and payments rose from about $15 million to more than $300 million.

For 2026, CMS added CPT 99445 for two to 15 days of device data in a 30-day period, beside 99454 for 16 to 30 days; you bill one or the other. CPT 99470 covers the first 10 minutes of treatment management, while 99457 covers the first 20 minutes and 99458 each additional 20.

Find it: flag device-supply claims with no management claim in the same month, and management claims with no logged interaction or time. The fix: run a monthly RPM completeness report and use a documentation template that captures transmission days, the interaction, and the minutes spent.

Leaks That Happen After the Claim Leaves

Three leaks happen after submission: denials nobody appeals, payments below the contracted rate, and claims that age past the appeal or timely filing deadline. None of them is a coding error, so a coding review won’t find them. You find them by comparing remittances with contracts and deadlines.

Prior Authorization Denials That Never Get Appealed

KFF’s analysis of CMS data shows how much money sits in unappealed denials. Medicare Advantage insurers fully or partially denied 4.1 million prior authorization requests in 2024, or 7.7% of requests. Only 11.5% of those denials went to appeal, and 80.7% of appeals ended in a full or partial overturn.

Denial rates also vary by insurer, from 4.2% at Elevance Health plans to 12.8% at UnitedHealth Group plans in that dataset. Use your own cardiology claim denials to set appeal rules by payer, because each plan denies and overturns at its own rate.

Payers now face deadlines too. Under the CMS prior authorization rule, impacted payers must decide expedited requests within 72 hours and standard requests within seven calendar days. Since 2026, they’ve also had to give a specific reason for each denial. The rule binds payers, not practices.

Denials Sitting in a Queue Nobody Works?Appeals stall when nobody has the hours to file them before the deadline. Our team handles cardiology denial management from start to finish: we file the appeal, track the payer’s deadline, and follow the claim to payment.Denial management for cardiology →

Payments Below the Contracted Rate

Load every payer’s fee schedule into your billing system, compare each remittance line with it weekly, and group variances by payer and CPT code. Cardiology underpayments don’t trigger alerts. You’ll see them only when someone puts the paid amount next to the contract.

Aged A/R and Write-Offs That Hide Preventable Losses

Review write-off adjustment codes and separate true contractual adjustments from losses your team could have prevented: timely filing, missing authorization, and missed appeal windows. Work old claims by deadline, not by age alone. For balances past 90 days, AR follow-up services can work the aged buckets while your staff stays on current claims.

What Changes for Cardiology Billing in 2027

On January 1, 2027, Medicare’s physician conversion factor drops, same-day office visits billed with 0-day global procedures take a 20% cut on the lower-paid service, and the G2211 add-on code gives way to modifiers. Each change moves expected payment, so re-price your fee schedule before your first January claims go out.

CY 2027 changes that affect cardiology billing

ChangeWhat CMS finalizedWhat to do
Conversion factorNon-qualifying APM factor of $32.63, down $0.77 (2.31%); qualifying APM factor of $32.95, down 1.83%. The drop reflects the end of a one-year 2.50% increase.Re-price your top codes using the CMS factors.
Same-day visit and procedureFor an office or outpatient E/M visit on the same day as a 0-day global procedure, the higher-paid service pays 100% and the other pays 80%. CMS had proposed 50%.CMS’s fact sheet doesn’t say whether diagnostic tests with an XXX global status fall under this rule, so confirm before you change echo or stress charges.
G2211Replaced by modifier B1, which adds 16% to the E/M payment, and B2, which adds 32% for Shared Savings Program ACO and LEAD Model participants.Update E/M charge rules.
Remote monitoringRemote therapeutic monitoring (RTM) is limited to established patients and needs a separately reportable initiating visit. The employed-clinical-staff requirement moves to January 1, 2029.Check which rules apply to RPM and which to RTM before you change workflows.
Prior authorization APIsUnder CMS-0057-F, the payer Prior Authorization API requirement starts on January 1, 2027.Ask your top payers how they’ll send authorization status and denial reasons.

CMS published these details in its CY 2027 fee schedule final rule fact sheet. ICD-10-CM updates again on October 1, 2027, so diagnosis pick-lists belong on your yearly calendar. Schedule the next cardiology billing audit for early February, once January remittances post.

The Cardiology Billing Audit Checklist

Use this table every quarter. Each row names one leak, the report that exposes it, and the red flag that means a claim needs review. Work the rows in order, because echo and stress errors often share a root cause in the same template or charge rule.

Twelve-point audit checklist for echo, stress, and monitoring claims

#LeakReport to pullRed flag
1Complete echo not supportedCPT 93306 claims, last 90 daysReport missing a Doppler section or signature
2Repeat echoTTE codes by patient, 12 monthsTwo or more studies with no documented change
3Missed echo add-onsReports mentioning contrast or strainNo Q-code or 93356 on the claim
4Wrong component for the settingEcho claims by place of service and modifier-26 in the office, or global on a facility claim
5Global stress code misused93015 by place of service93015 on place of service 19, 21, 22, or 23
6Stress echo code pair93350 and 93351 with stress codes93351 alongside 93015 to 93018
7Nuclear components missingCPT 78452 claimsNo stress, agent, or isotope code
8Coverage documentationStress claims from October 1, 2026Deleted I42.0, I42.8, or I49.8
9Monitoring overlapMonitoring codes by patient, 30 daysTwo starts within 29 days
10Wrong monitoring familyMonitoring claims and wear timeDuration doesn’t match the code
11Device period errorsDevice roster and claimsUnbilled or duplicate periods
12RPM components missingRPM claims by monthSupply billed without management

KPIs to Track After Each Audit

Set your baseline in the first audit and track the change quarter over quarter. No published cardiology benchmark holds up well enough to borrow, so compare each quarter with your own starting point and watch the direction of each number.

Audit KPIs, formulas, and the direction to watch

KPIFormulaDirection to watch
First-pass acceptance rateClaims accepted on first submission ÷ claims submittedUp
Denial rate by payer and reasonDenied claims ÷ claims processed, by payer and CARCDown
Appeal rateAppealed denials ÷ total denialsUp
Overturn rateOverturned appeals ÷ appeals filedUp
Contract variance ratePaid lines below contract ÷ paid linesDown

When an Outside Audit Makes Sense

An outside audit makes sense when the same denial reason keeps coming back, nobody owns the device-clinic roster, or your in-house team audits its own work. A reviewer outside the workflow catches the errors your staff has learned to look past.

One O Seven RCM handles cardiology billing and coding inside full cardiology revenue cycle management, with AAPC-certified billers and month-to-month terms. Our cardiology medical billing team runs these same 12 checks on your claims. Cardiology billing services sit inside our specialty medical billing services, which cover more than 75 specialties.

See What These 12 Checks Find in Your ClaimsStart with a free cardiology billing audit. You’ll see findings on your own echo, stress, and monitoring claims before you decide on anything else, and our team walks through each one with you.Request your free billing audit →

Frequently Asked Questions

Who can perform a cardiology billing audit?

A certified coder or auditor with cardiology experience, such as someone holding the CPC or CPMA credential, can run one. Independence matters as much as the credential. Staff who code the claims every day tend to miss their own repeat errors, so an outside reviewer or a coder from another team spots patterns faster.

What’s the difference between a cardiology coding audit and a billing audit?

A coding audit checks whether the codes on each claim match the documentation. Billing audits cover that and more: charges that never reached a claim, payments compared with contracts, denials and appeal deadlines, and write-offs. Run the coding review first, then extend the same sample into payments and denials.

How much does a billing audit cost for a cardiology practice?

Cost depends on scope: how many service lines, how many providers, and how many months of claims you want reviewed. A focused review of one service line takes less work than a full review across every payer. One O Seven RCM offers a free initial billing audit, so you can see findings on your own claims first.

Is OIG auditing cardiology practices in 2026?

OIG has an active audit of Medicare Part B remote patient monitoring services, project OAS-25-05-008, and it reaches any cardiology practice that bills RPM. The agency adds and closes Work Plan projects throughout the year. Check the Work Plan page for current status instead of relying on an expected report date from a secondary source.

What should a practice do if an audit finds it was overpaid?

Quantify the overpayment, report it, and return it within the 60-day window under 42 CFR 401.305. If your practice submits the matter through OIG’s Self-Disclosure Protocol or CMS’s Voluntary Self-Referral Disclosure Protocol, the deadline pauses while that process runs. Talk to compliance counsel before you pick a route.

Is revenue leakage in cardiology billing the same as fraud?

No. Leakage means money your practice earned and didn’t collect, such as a missed add-on or an unappealed denial. CMS says its improper payment rate isn’t a fraud rate either; it measures payments that didn’t meet Medicare requirements. Knowingly keeping money you weren’t owed is different, because it can create False Claims Act exposure.

What records should a practice have ready before an audit?

Gather the records that prove each claim: orders and referrals, signed interpretations, retained images, device rosters and transmission logs, radiopharmaceutical invoices, and payer contracts with current fee schedules. Noridian’s stress testing billing article, for example, requires the referral order in the record. Thin documentation is the main reason CMS reviewers can’t confirm a payment.

How We Sourced This Checklist

We built this checklist from primary documents: CMS fact sheets and coverage articles, Medicare Administrative Contractor guidance, HHS OIG reports, the DOJ, the eCFR, AMA CPT descriptors, AAPC and ASE coding guidance, Cigna’s published policy, and KFF’s analysis of CMS data. Our team checked every rule and figure as of November 16, 2026.

We left out three kinds of claims we couldn’t verify: vendor-published revenue leakage percentages, cardiology-wide improper payment rates not taken from CMS tables, and dollar-per-leak estimates. This guide is educational and isn’t legal or coding advice. Payer policies vary, so confirm details with your MAC and your contracts.

About the Author

Alex Mahone

Alex Mahone is the Sales Director at One O Seven RCM, with more than 12 years of experience in the medical billing and healthcare revenue cycle management field. Through his work with healthcare providers and medical practices, he has developed a strong understanding of the day-to-day challenges involved in billing, collections, and revenue cycle operations. Alex also contributes to the One O Seven RCM blog, where he shares practical insights based on his industry experience to help healthcare professionals better understand medical billing and RCM-related topics.

Recent Blogs

Cardiac Monitoring Claim Denials: Holter Monitor CPT Codes, Event Monitors, and Remote Device Billing for 2027

Stress Test Authorization Denials: How Cardiology Practices Protect Reimbursement

Echocardiogram Claims Underpaid? A Cardiology Practice Guide to 93306, 93308, and 26/TC

Cardiology Billing Audit Checklist: 12 Revenue Leaks in Echo, Stress Testing, and Monitoring

12 Best Medical Billing Companies in Massachusetts (2026): Verified and Compared

Best Medical Billing Companies in Alabama for 2026 and 2027: Compared on Price, BCBSAL, and Medicaid

Book a Consultation