Email Call Message
🦃 THIS THANKSGIVING, PAY LESS FOR MEDICAL BILLING! Get Expert Medical Billing Services at Just 2.39%. Switch to One O Seven RCM & Start Saving Today! 🎁 Claim Your Deal Now! | Terms Apply.
🦃 THIS THANKSGIVING, PAY LESS FOR MEDICAL BILLING! Get Expert Medical Billing Services at Just 2.39%. Switch to One O Seven RCM & Start Saving Today! 🎁 Claim Your Deal Now! | Terms Apply.
🦃 THIS THANKSGIVING, PAY LESS FOR MEDICAL BILLING! Get Expert Medical Billing Services at Just 2.39%. Switch to One O Seven RCM & Start Saving Today! 🎁 Claim Your Deal Now! | Terms Apply.
🦃 THIS THANKSGIVING, PAY LESS FOR MEDICAL BILLING! Get Expert Medical Billing Services at Just 2.39%. Switch to One O Seven RCM & Start Saving Today! 🎁 Claim Your Deal Now! | Terms Apply.

Cardiac Monitoring Claim Denials: Holter Monitor CPT Codes, Event Monitors, and Remote Device Billing for 2027

Cardiac Monitoring Claim Denials: Holter Monitor CPT Codes for 2027, biller reviewing a Holter ECG report

Most cardiac monitoring claim denials trace back to three errors. The code doesn’t match the recorded wear time or device, two entities bill the same episode, or the chart doesn’t support medical necessity. Holter monitor CPT codes are where most practices run into all three first.

This guide covers Holter monitors, extended ECG patches, event monitors, and mobile cardiac telemetry. It also covers the 0937T to 0940T codes and remote pacemaker, ICD, and loop recorder checks. Each rule ties to its source: CMS NCD 20.15, WPS Article A57476, CGS Article A60292, Noridian, and the CY 2027 fee schedule.

The cardiology billing team at One O Seven RCM wrote it from the monitoring denials we work for practices and their vendors. When a rule comes from one Medicare contractor instead of all of them, we say so, because your MAC’s policy is the one that decides your claim.

Key takeaways

  • Wear time picks the family. Holter monitor CPT codes 93224 to 93227 cover up to 48 hours, 93241 to 93244 cover more than 48 hours to 7 days, and 93245 to 93248 cover more than 7 to 15 days.
  • Event monitors (93268 to 93272) and mobile cardiac telemetry (93228 and 93229) cover up to 30 days and bill one unit per episode.
  • A Holter recording under 12 hours takes modifier 52, and WPS bars modifiers 26 and TC on 93224 to 93229 and 93268 to 93272.
  • Noridian says overlapping monitoring denials carry no appeal rights, so the fix has to happen before hookup.
  • Remote pacemaker and ICD checks bill once per 90 days. Loop recorder code 93298 bills once per 30 days.
  • The 2026 temporary monitoring LCDs from Noridian, Palmetto GBA, and CGS treat routine monitoring without symptoms as screening.
  • Medicare’s conversion factor drops to $32.6286 (non-QP) and $32.9548 (QP) on January 1, 2027.

Holter Monitor CPT Codes and Every Other Cardiac Monitor Code, Sorted by Wear Time

Holter monitor CPT codes 93224 to 93227 cover continuous ECG recording for up to 48 hours. Longer recordings, patient-activated event monitors, and real-time telemetry each have their own code family. Pick the family from the recorded hours on the scanning report first, then confirm it against the device type.

The Wear-Time Code Map

Match the device and the recorded wear time to a row, then pick the global or component code your entity performed. The cardiac event monitor CPT code family and the telemetry codes sit in the same table, so your team can see where each device belongs.

Monitor typeHow it recordsWear timeGlobalRecordingScanning or technicalInterpretation
HolterContinuousUp to 48 hours93224932259322693227
Extended ECG patchContinuousMore than 48 hours to 7 days93241932429324393244
Extended ECG patchContinuousMore than 7 days to 15 days93245932469324793248
Long-term continuous (Category III)ContinuousMore than 15 days to 30 days0937T0938T0939T0940T
Event monitorPatient- or auto-activated memory loop, 24-hour attendedUp to 30 days932689327093271 (transmission and analysis)93272
Mobile cardiac telemetry (MCT)Real-time, attended surveillance centerUp to 30 daysNoneIncluded in 932299322993228
Implanted devicesRemote interrogation30 or 90 daysSee remote device section

The boundaries include their end points. A 48-hour study stays in the Holter family, and a patch worn for 7 full days stays in 93241 to 93244. Code from the recorded hours on the scanning report. Patients pull patches off early, so the ordered duration and the billed duration often differ.

CGS lists the 0937T to 0940T family for continuous recordings longer than 15 days and up to 30 days in its CGS billing article A60292. These are Category III codes, and coverage still varies by payer. Check the plan before you schedule a 30-day continuous patch.

Which CPT Code Fits a 24-Hour, 72-Hour, 7-Day, 14-Day, or 30-Day Monitor?

  • 24 hours: 93224 when one provider does the hookup, scanning, and read; otherwise 93225, 93226, and 93227 by component.
  • 48 hours: the same Holter family, since the 48 hour Holter monitor CPT code range covers recordings up to 48 hours.
  • 72 hours or 3 days: 93241 to 93244.
  • 7 days: 93241 to 93244.
  • 14 days: 93245 to 93248, which is where a Zio patch CPT code lands for a 14-day wear.
  • 30 days: event monitors use 93268 to 93272, MCT uses 93228 and 93229, and a continuous patch uses 0937T to 0940T.

The hookup or application code is 93225 for a Holter, 93242 or 93246 for a patch your staff applies in the office, and 93270 for an event monitor. Each one belongs only to the entity that placed the device on the patient.

Is CPT 93228 a Holter Monitor Code?

No. CPT 93228 is the physician review and interpretation code for mobile cardiac telemetry, and it pays for up to 30 days of real-time attended monitoring. Holter coding stops at 93227, and the mobile cardiac telemetry CPT code pair, 93228 and 93229, sits in its own family.

Devices record in three ways, and each way maps to a family. Holters and patches store every beat. Event monitors save a memory loop around a symptom or trigger. MCT streams data to an attended center in real time. Our cardiology CPT codes guide maps the rest of the cardiovascular range.

Why Cardiac Monitoring Claims Get Denied: Seven Root Causes

Most cardiology claim denials on monitoring services come from seven fixable causes, and five of them start before anyone builds the claim. Match the denial on your remit to the cause below, then go to the section that fixes it.

CauseWhat it looks likeTypical denial codeWhere to fix it
Wrong code family for the recorded wear timeA 52-hour recording billed as Holter monitor CPT code 93224Varies by payer; often CO-50 or CO-16Wear-time code map; extended ECG section
Global code and a component billed for one episode93224 and 93227 for the same studyCO-97Holter and event monitor sections
Modifier 26 or TC on codes that already split93227-26CO-4Holter billing guidelines
Overlap or repeat inside a payer windowPatch and event monitor on the same datesCO-18, OA-18, CO-119, CO-151, or a MAC overlap editOverlap and frequency section
Documentation doesn’t meet the LCDOrder says “routine” or “rule out”CO-50 with N115, or CO-11Medical necessity section
No treating-physician order or no prior authorizationCommercial patch study without an authorizationCO-50 or CO-197Medical necessity section
Implanted device billed under the wrong code or clockLoop recorder billed as 93294CO-4 or a frequency denialRemote device section

One denial code can come from different causes. CO-50 on Holter monitor CPT codes might mean a weak diagnosis, or it might mean the order never said why the patient needed more than 24 hours. Read the remark code before your team picks a corrected claim or an appeal, and use our list of common denial codes for the pairings.

Overlap edits deserve extra attention. The Noridian monitoring billing guidance lists overlapping monitoring among the top questions its provider contact center receives, and its component table shows no global code for ambulatory cardiac telemetry.

Do CO-97 and overlap denials keep hitting the same monitor codes? Our cardiology denial management team traces each one to who billed which part of the episode. Then we fix the handoff that caused it.

Holter Monitor Billing Guidelines for 93224 to 93227

Holter monitor billing comes down to three choices: global code 93224 or components, the date of service each code carries, and whether the recording ran under 12 hours. Get those three right and most Holter monitor CPT codes pay on the first submission.

93224 Global vs 93225, 93226, and 93227 Components

Yes, you can bill 93225 and 93227 together when your practice hooked up the monitor and read the study while an outside scanning service billed 93226. Neither code goes on the same episode as 93224, because the global code already includes the hookup, the scanning, and the read.

Billing 93224 also means owning the equipment. The AAPC Cardiology Coding Alert states that your cardiologist must own the equipment to bill 93224. Our 93224 global Holter guide walks through the rate and the ownership test in more detail.

Use the row that matches your arrangement. When a vendor scans for you, the 93226 scanning analysis line belongs on the vendor’s claim, and your practice leaves it off.

SetupYour practice billsOutside entity bills
You own the device, scan, and read93224Nothing
You hook up and read; a vendor scans93225 and 9322793226
A hospital records and scans; you read9322793225 and 93226

When your staff hooks up in the office, 93225 hookup billing carries the date the device went on. The physician’s read goes out as 93227 interpretation billing once the report is signed, under the reading provider’s NPI.

The 12-Hour Rule: When a Short Holter Needs Modifier 52

A recording under 12 hours still bills under Holter monitor CPT codes 93224 to 93227, with modifier 52 for reduced services. The WPS billing article A57476 spells it out for recordings under 12 hours. Recordings from 12 to 48 hours need no modifier.

The long end has its own trap. NCD 20.15 says a 24-hour recording is “generally adequate to detect most transient arrhythmias,” and it requires documented medical necessity for monitoring longer than 24 hours. A 48-hour order needs a note that explains why one day of recording wasn’t enough.

Date of Service Rules That Trip Holter Claims

WPS sets two date rules. Global 93224 uses the date of the physician’s review as the date of service, while 93225, 93226, and 93227 each use the date that service happened. A global claim sent before the read is signed carries the wrong date.

Split claims fail in the opposite direction. If your practice dates the hookup line to the read date, it won’t line up with the vendor’s scanning claim, and the payer sees two stories about one study. These date rules come from WPS, so check your own MAC’s article too.

Why Modifier 26 and TC Get Holter Claims Denied

Don’t append 26 or TC to Holter codes. CPT already splits the work into 93225, 93226, and 93227, and WPS Article A57476 bars both modifiers on 93224 to 93229 and on 93268 to 93272. Payers return those lines as CO-4, which our guide to CO-4 modifier denials covers.

Echo and stress tests follow another rule. Those codes do take 26 and TC, which is why billers reach for them on Holters out of habit. Our modifier 26 rules guide lists the families that use the split. On a Holter, modifier 52 for a short recording is the only modifier you’ll need.

WPS adds one claim-form rule worth building into your workflow. The physician interpreting the test has to appear on the claim with a sequence number in Box 24K. Leave that out and expect the claim back for missing information.

Extended ECG and Zio Patch CPT Codes (93241 to 93248): Where Patch Claims Break

Extended ECG patches bill under 93241 to 93248, split at 7 days. Each half has its own global, recording, scanning, and interpretation code. Patch claims deny most often when your practice and the patch vendor both bill the same component for one wear period.

93241 to 93244 vs 93245 to 93248: The 7-Day Split

Part of the serviceMore than 48 hours to 7 daysMore than 7 days to 15 days
Global (all parts)9324193245
Recording (connection and initial recording)9324293246
Scanning analysis with report9324393247
Review and interpretation9324493248

CPT 93241 is the global code for patches worn more than 48 hours up to 7 days. Inside that band, 93242 is the recording code and 93244 is the interpretation code. None of these belong to the Holter monitor CPT codes, which end at 93227.

A 14-day Holter order is a patch order in coding terms, so it bills under 93245 to 93248. Some published code tables swap the scanning and interpretation codes, so check any table against the CPT descriptor before your team builds charges from it.

Zio Patch CPT Codes: Who Bills the Scanning and Who Bills the Read

For a Zio XT patch, iRhythm’s monitoring service bills the scanning code and your practice bills the interpretation. As of November 2026, iRhythm’s published billing guidance lists 93243 for more than 48 hours up to 7 days on its side. For more than 7 days up to 15 days, it bills 93247.

Zio patch billing on your side covers 93244 or 93248 for the read, matched to the wear band on the report. If your staff applied the patch in the office, 93242 or 93246 goes on your claim too. So 93246 and 93248 can go on one claim when your office applied and read, and the vendor billed 93247.

Zio AT is a different product. iRhythm bills it as mobile cardiac telemetry, with 93229 for the technical work and 93228 for the interpretation. A coder who sees “Zio” on the order and reaches for the patch codes puts the claim in the wrong family, so read the model name before you code.

Vendor reconciliation is where most patch money leaks. Our cardiology audit checklist includes a monitoring section built for matching your lines to the vendor’s.

Not sure your patch claims match what your monitoring vendor billed? A cardiology billing audit lines up both sides, episode by episode, before a payer does it for you.

Overlap Rules and the Inpatient Exclusion for Extended Monitoring

WPS Article A57476 says you can’t bill other EKG monitoring codes at the same time as 93241 to 93248. It also lists extended monitoring as non-covered for inpatient or outpatient observation care. A patch that starts during an observation stay needs a second look before anyone bills it.

CGS goes further. For the same monitoring period, its billing article bars 93241 to 93244 alongside 93224 to 93229, 93245 to 93248, 93270 to 93272, and 0937T to 0940T. It also bars the remote physiologic monitoring codes 99445, 99453, and 99454. If your practice runs an RPM program, check the RPM dates before you bill a patch.

Cardiac Event Monitor CPT Codes (93268 to 93272) and the Attended Monitoring Rule

Cardiac event monitor CPT codes 93268 to 93272 cover patient-activated or auto-triggered recorders worn up to 30 days. Event monitor claims deny when a global code and a component land on the same episode, or when nobody can prove the 24-hour attended monitoring happened.

Global 93268 vs Components 93270, 93271, and 93272

The work split decides the code, and 30-day event monitor billing follows the same ownership logic as Holter billing. Our 93268 global event billing guide covers the global code in depth, including its 2026 rate.

SetupYour practice billsVendor or IDTF bills
You own the device, run the attended center, and read93268Nothing
You hook up and read; a vendor monitors93270 and 9327293271
A vendor ships or hooks up and monitors; you read9327293270 and 93271

93270 event monitor hookup covers connection, recording, and disconnection. 93271 covers transmission and analysis at the attended center, the piece most vendors keep. The physician’s review and signed report go out as 93272 event interpretation.

Bill the global code or the components for one episode, never both. Payers treat the pair as unbundling and return it the way our guide to CO-97 bundling denials describes. WPS bars modifiers 26 and TC on this whole family as well.

What 24-Hour Attended Monitoring Has to Show

An event monitor claim needs proof that trained staff received transmissions around the clock with a physician on call. WPS requires a physician available 24 hours a day for immediate consultation. The person receiving transmissions has to be a technician, nurse, or physician trained in reading ECGs.

NCD 20.15 adds a device rule: the time-sampling mode isn’t covered under ambulatory EKG monitoring. CGS lists what each transmission strip should carry:

  • Patient name and presenting diagnosis
  • Transmission date and time
  • Channel
  • PR and QRS intervals when abnormal
  • Rate and rhythm
  • Symptoms, or the absence of symptoms
  • Any action staff took

The Exclusive-Use Rule in the 2026 LCDs

Each patient needs their own recorder for the whole monitoring period. CGS LCD L40244 denies claims as not medically necessary when a patient lacks exclusive use of a recorder for the entire 30-day service period. Keep the device serial number on the hookup note so you can prove it.

That rule shapes event monitor Medicare coverage in Noridian, Palmetto GBA, and CGS states, which all adopted the same temporary monitoring LCD in 2026. Shared or recycled recorders without a clean handoff record are an easy target in a post-payment review.

Mobile Cardiac Telemetry Billing: 93228 and 93229

Mobile cardiac telemetry (MCT) bills as two codes with no global option. Under that split, mobile cardiac telemetry CPT code 93229 is the technical service, and 93228 is the physician’s review and report. Each bills one unit per course of treatment covering up to 30 consecutive days.

What Is the Difference Between CPT 93228 and 93229?

93228 is the professional component: physician review, interpretation, and report, with 24-hour availability. 93229 is the technical component: hookup, patient instructions, attended surveillance, analysis, and transmission of daily and emergent reports. The 93228 CPT code goes on the reading practice’s claim, and the monitoring company or IDTF bills 93229.

Noridian’s component table shows no global code for ambulatory cardiac telemetry and lists the hookup as included in 93229. A practice that owns no telemetry center bills 93228 alone.

How Often Can 93228 and 93229 Be Billed?

Once per course of treatment. WPS instructs providers to bill one unit of 93228 and 93229 per course, and a monitoring episode of 1 to 30 consecutive days counts as one unit. The contractor denies any additional 93228 or 93229 claim inside the same episode.

The date rule differs from Holter. MCT reports the date the patient was first placed on the monitor, while a global Holter uses the physician’s review date. When one team bills both families, that difference causes date errors on otherwise clean claims. Neither code takes modifier 26 or TC.

MCT Denials: Holter Overlap, Staffing, and the Zio AT Trap

WPS covers either the wearable monitor or the up to 48-hour monitor on the same dates, never both. A Holter and MCT billed for overlapping dates means one claim denies. MCT also sits outside the Holter monitor CPT codes, even when the order says “heart monitor.”

Staffing gets audited too. CGS LCD L40244 requires at least an EKG technician to staff the receiving station 24 hours a day. An answering service doesn’t meet the rule. MCT orders often cite paroxysmal AF, so check the atrial fibrillation ICD-10 codes before you submit.

Zio AT doesn’t use the Zio patch CPT codes from the extended ECG section. It bills as MCT under 93229 and 93228, so the 30-day course rules above apply to it.

Overlap and Frequency Denials Across Monitor Families

Overlap denials are the hardest cardiac monitoring claim denials to recover. Medicare’s claims system checks Part A and Part B claims for the same patient nationwide. At least one contractor gives you no appeal rights when it finds an overlap.

Noridian’s 29-Day Set Rule

Noridian says monitoring codes must be billed in sets, and sets can’t be completed within 29 days of each other. Its claims processing system reviews all Part A and Part B claims nationwide for overlaps, and Noridian states there are no appeal rights for these denials.

Prevention happens at scheduling. Call the referring office to confirm what it ordered before your staff hooks up anything. If a denial lands anyway, the Part B provider contact center can tell you which code caused it and which provider holds the overlapping claim.

The Cross-Family Overlap Matrix

If you billDon’t bill for the same monitoring periodSource
93224 to 93227 (Holter)Wearable monitor codes on the same datesWPS A57476
93241 to 9324493224 to 93229, 93245 to 93248, 93270 to 93272, 99445, 99453, 99454, 0937T to 0940TCGS A60292
93245 to 9324893224 to 93229, 93270 to 93272, 99445, 99453, 99454, 0937T to 0940TCGS A60292
93228 and 93229A second 93228 or 93229 claim in the same courseWPS A57476
Any Holter, event, or MCT setAnother set within 29 daysNoridian

CGS LCD L40244 closes the last gap. A test can’t be billed during any period that overlaps another covered device’s billing timeframe, even when the first test stopped early and the patient was reconnected for follow-up. Many duplicate claim denials in cardiology start with this situation.

How Often Will Medicare Pay for a Holter Monitor?

NCD 20.15 sets no national calendar limit, but Medicare contractors limit repeats through overlap edits, set rules, and LCD language on repeat testing. Three rules matter most for Holter monitor CPT codes and the other monitor families:

  • NCD 20.15 requires documented medical necessity for monitoring longer than 24 hours.
  • Noridian won’t pay a second set completed within 29 days of the first.
  • CGS LCD L40244 says testing beyond 30 consecutive days is “only rarely medically necessary,” and a repeat test within a year is unlikely to be necessary without new or recurrent symptoms.

Commercial plans set their own Holter monitor frequency limitations, and they don’t agree with each other. Our 93268 guide keeps a table of payer frequency windows for UnitedHealthcare, Aetna, Horizon, and other plans.

Overlap denials that can’t be appealed tend to sit in aging buckets until someone writes them off. Our AR follow-up team flags them early, before the timely filing window closes on the claims your practice can still fix.

Remote Device Billing: Pacemaker, ICD, and Loop Recorder Codes

Remote device checks run on two clocks: 90 days for pacemakers and ICDs, and 30 days for loop recorders and physiologic monitors. Most remote device monitoring billing denials we work come from the wrong clock or the wrong device family, so start every claim with the device record.

Remote Device Code Map: The Pacemaker Interrogation CPT Code and the Rest

The pacemaker interrogation CPT code depends on whether the check happened in person or remotely, and the same split applies to every other implanted device. Use this map before you pick a code.

DeviceRemote professionalRemote technicalRemote periodIn-person interrogation
Pacemaker9329493296Up to 90 days93288
ICD9329593296Up to 90 days93289
Implantable cardiovascular physiologic monitor93297 (global, or with 26)93297 with TCUp to 30 days93290
Subcutaneous cardiac rhythm monitor (implantable loop recorder)93298 (global, or with 26)93298 with TCUp to 30 days93291
Wireless pulmonary artery pressure sensor93264Single codeUp to 30 daysNot applicable

Loop recorder insertion is 33285 and removal is 33286, and neither one is a monitoring code. Pacemaker implants follow their own rules, which our pacemaker implant coding guide covers.

Can 93294 and 93296 Be Billed Together?

Yes. 93294 is the pacemaker professional component and 93296 is the technical component, and one entity bills both when it performs both parts. Novitas article A56602 says 93293 to 93296 are reported no more than once every 90 days, and never when the monitoring period runs under 30 days. Our 93294 pacemaker remote billing guide covers the documentation.

Remote ICD monitoring billing follows the same 90-day clock, with 93295 ICD remote billing for the read. One trap catches new billers: 93296 serves pacemakers and ICDs only. Our 93296 technical component guide explains why it is never the technical half of 93298.

Implantable Loop Recorder CPT Code Rules: 93298 and the End of G2066

The implantable loop recorder CPT code for remote review is 93298, billed once per 30 days, either globally or split with modifiers 26 and TC. CPT guidance, restated in device makers’ coding guides, says 93297 and 93298 aren’t reported when the monitoring period runs under 10 days. Our 93298 loop recorder guide covers the edge cases.

Many claim templates still carry retired codes. The ACC Coding Corner explains that CMS created G2066 in 2020 after 93299 was deleted. In 2024, the fee schedule deleted G2066 and gave 93297 and 93298 a technical component. A template that still sends G2066 or 93299 will deny.

A CardioMEMS-style pulmonary artery pressure sensor bills under 93264 once per 30 days, never under 93297. The 93297 physiologic monitor code fits implanted monitors whose reports analyze physiologic data, while implantable loop recorder billing under 93298 covers rhythm episodes.

Why Device Interrogation Isn’t Remote Physiologic Monitoring

Remote interrogation of pacemakers, ICDs, and loop recorders bills under 93294 to 93298, and the remote physiologic monitoring codes 99453, 99454, 99445, and 99457 describe a different service. For that reason, remote pacemaker monitoring billing stays on the 93294 to 93296 track, whatever the vendor portal calls the transmission.

That split matters for 2027. The RPM changes in the 2027 fee schedule, including the new initiating visit, apply to RPM and RTM codes. CMS’s fact sheet for the final rule names no change to device interrogation codes.

Medical Necessity Denials Under NCD 20.15 and the 2026 LCDs

Medicare pays for cardiac monitoring only as a diagnostic test for documented symptoms or clinical indications. The 2026 LCDs spell out which indications count, and Holter monitor medical necessity starts with what the ordering physician writes on the order.

What NCD 20.15 Requires

CMS NCD 20.15 covers EKG services as diagnostic tests when there are documented signs and symptoms. It gives no coverage when the service is a screening test or part of a routine exam. WPS Article A57476 also quotes 42 CFR 410.32: the treating physician has to order the test.

The 2026 Temporary Monitoring LCDs and Their Coverage Criteria

Three MACs adopted a new LCD in 2026. Noridian LCD L40255 and Palmetto GBA’s L40257 took effect June 21, 2026, and CGS L40244 took effect June 28, 2026. WPS (L34636), Novitas (L39490), and First Coast (L39492) keep their own LCDs. If LCDs are new to your team, start with how LCDs work.

Under the new LCD, monitoring is reasonable and necessary when the device is temporary and at least one of these applies:

  • Symptoms suggesting arrhythmia occur infrequently, more than 24 hours apart
  • Monitoring is needed to manage medication such as antiarrhythmic dosing
  • Cryptogenic stroke or TIA of undetermined origin
  • Follow-up after surgical or ablative procedures for arrhythmia
  • Assessment of ventricular ectopy in cardiomyopathy, long QT, Brugada syndrome, or congenital heart disease
  • Embolic-appearing MI or evidence of systemic emboli
  • Arrhythmia monitoring before or after TAVR

The limitations matter as much as the criteria. Noridian, Palmetto GBA, and CGS exclude patients in hospitals, emergency rooms, and skilled nursing facilities, require an FDA-cleared device, and treat routine monitoring without treatable symptoms as screening. For Medicare Advantage, the UnitedHealthcare AECG policy adds that a 24 to 48 hour monitor fits patients with daily or near-daily symptoms.

Diagnosis Codes: What Changed on October 1, 2026

A payable diagnosis alone won’t carry the claim. CGS says linking a procedure to a payable diagnosis is insufficient, and the record has to document a diagnosis or clinical suspicion of a cardiac event. Holter monitor ICD-10 codes need a progress note that explains them.

The code lists also moved this fall. CGS and Noridian added I47.10, I47.20, I47.9, and I49.9 to their covered codes effective October 1, 2026. The FY 2027 ICD-10-CM update ended I49.8 as a billable code and replaced it with I49.81 (Brugada syndrome), I49.82 (ventricular bigeminy), and I49.89.

Common supporting codes include R00.2 for palpitations, R55 for syncope, R42 for dizziness, and the I48 atrial fibrillation codes. Our palpitations ICD-10 coding guide covers R00.2 documentation. For rate symptoms, compare the tachycardia ICD-10 choices before you settle on an unspecified code.

When a slow rate drove the order, our bradycardia R00.1 guide shows what the note should say. Every code you use still has to appear on your own MAC’s covered list, because the lists differ from one contractor to the next.

If you expect Medicare to deny, get a signed ABN before hookup and append GA. GZ tells Medicare you expect a denial and have no ABN on file. A denial that cites the LCD comes back as CO-50, and our guide to CO-50 medical necessity denials covers the appeal.

The remark code tells you which rule the payer applied. An N115 LCD remark code means the decision rests on a Local Coverage Determination, so your appeal has to answer that LCD’s criteria point by point.

Prior Authorization for Patches, Event Monitors, and MCT

Original Medicare doesn’t require prior authorization for these services, but many Medicare Advantage and commercial plans do, most often for extended patches and MCT. Our prior authorization support team checks each plan’s rule before the device goes on the patient.

UnitedHealthcare updated its Medicare Advantage AECG policy effective November 1, 2026, so pull the current version before you schedule. MCT prior authorization rules change more often than Holter rules, and a missing approval comes back as CO-197 in most cases.

Working the Denial: CARC Codes, Corrected Claims, and Appeals

Read the CARC and the remark code together before anyone touches the claim. The same code on two cardiology claim denials can mean a fixable coding error on one and a dead end on the other. Your choice between a corrected claim and an appeal decides whether the money comes back.

Denial Code Action Table

Use this table for Holter monitor CPT codes, patches, event monitors, MCT, and device checks. Each row pairs a cardiology denial code with the monitoring error behind it and the next step.

CodeMonitoring triggerWhat to do
CO-426 or TC on a code that already has componentsSend a corrected claim without the modifier
CO-11Diagnosis doesn’t support the codeCorrect the claim with the documented, specific diagnosis
CO-16Missing interpreting physician, ordering NPI, or other dataCorrect the claim with the missing data
CO-18 or OA-18Exact duplicate submissionVoid or correct it; don’t appeal
CO-50 with N115Record doesn’t meet the LCDAppeal with LCD-aligned documentation
CO-97Global and component billed for one episodeDecide who bills what, then void the duplicate
CO-119 with M86Same or similar service already paid inside the windowCheck claim history; appeal only with a new indication
CO-151Frequency the payer won’t supportAppeal only if the record shows a new clinical reason
CO-197No prior authorizationRequest retro authorization where the payer allows it
MAC overlap editAnother provider’s monitor overlaps yoursAt Noridian there are no appeal rights; call the contact center to find the overlap

M86 means the payer already paid a same or similar service within the time frame. N115 means the decision rests on an LCD. If your team mixes them up, it builds the wrong appeal and loses weeks before the second denial arrives.

Clerical misses cost the least to fix. Our CO-16 missing information guide covers the field-level corrections, and the CO-11 diagnosis mismatch guide walks through diagnosis pointer errors on split claims.

Duplicates and frequency denials need a history check first. Start with OA-18 duplicate denials when the claim went out twice by mistake. Use CO-119 benefit maximum when a same or similar service already paid, and CO-151 frequency denials when the payer disputes how often you monitored.

Authorization gaps have their own playbook. The CO-197 authorization denials guide covers retro requests and the payers that accept them.

Corrected Claim, Reopening, or Redetermination

Coding errors and missing data go out as corrected claims or clerical reopenings. Medical necessity disagreements go to redetermination, and the CMS redetermination rules give you 120 days from receipt of the initial determination to file. Send the order, symptom notes, wear dates, transmission log, and signed interpretation in one packet.

If the same monitoring denials keep coming back after correction, the problem sits upstream. Our denial management services trace each pattern to the device, the date, the component, or the documentation, then fix the workflow behind it.

What Changes for Cardiac Monitoring Billing in 2027

The biggest confirmed 2027 change is payment. Medicare’s conversion factor drops on January 1, 2027, which lowers allowed amounts for every monitoring code paid under the Physician Fee Schedule.

  • Conversion factor: CMS released the CY 2027 final rule on November 4, 2026. The CMS CY 2027 PFS fact sheet confirms the cut from $33.4009 to $32.6286 for non-qualifying APM participants and from $33.5675 to $32.9548 for qualifying APM participants, effective January 1, 2027.
  • RPM and RTM: practitioners must furnish a separately reportable initiating visit when RPM or RTM starts, RTM is limited to established patients, and the employed-staff requirement moved to January 1, 2029. Remote device monitoring billing under 93294 to 93298 isn’t named in these changes.
  • Code set: CPT 2027 takes effect January 1, 2027. We found no published change to the Holter monitor CPT codes or the other monitoring families in this guide, so confirm against your 2027 codebook before your first January claims.
  • Diagnosis lists: the October 1, 2026 ICD-10 updates in CGS A60292 and Noridian A60279 carry into 2027, and UnitedHealthcare’s Medicare Advantage AECG policy took effect November 1, 2026.
  • Rates: pull 2027 per-code rates from the final 2027 CMS files. The 2026 national non-facility rate for global 93224 was $70.48, and proposed 2027 figures published in July 2026 aren’t final rates.

Pre-Submission Checklist for Cardiac Monitoring Claims

Run these seven checks before any Holter, patch, event monitor, MCT, or device claim leaves your office, whether you’re billing Holter monitor CPT codes or remote device checks. Each one maps to a denial covered above.

  1. The code family matches the recorded wear time and the device type.
  2. One entity bills the global code, or each entity bills only its own component.
  3. No 26 or TC appears on 93224 to 93229 or 93268 to 93272, and a Holter under 12 hours carries modifier 52.
  4. The date of service follows the rule for that code family.
  5. No other monitor, RPM code, or prior set falls inside the overlap window.
  6. The order, symptoms, and diagnosis meet your MAC’s LCD, with an ABN on file if you expect a denial.
  7. Prior authorization is on file for Medicare Advantage and commercial patients.

Want a team to run these checks on every monitoring claim? One O Seven RCM handles Holter monitor billing, device checks, denials, and AR follow-up as full-service cardiology RCM. The fee is 3% of monthly collections, with no setup fees.

When a new reading cardiologist needs payer enrollment first, our credentialing runs $107 per insurance. Want to see where your monitoring claims stall? Talk to our billing team and ask for a free billing audit of your last 90 days of monitoring claims.

Cardiac Monitoring Billing FAQs

Does Medicare Cover Holter Monitoring?

Yes. Medicare covers a Holter monitor as a diagnostic test when the record documents symptoms or another clinical indication and the treating physician ordered it. NCD 20.15 excludes screening and routine exams. The patient still owes Part B cost-sharing, and monitoring past 24 hours needs documented medical necessity.

Is a Holter Monitor Covered by Commercial Insurance?

In most cases, yes, when the plan’s medical policy criteria are met. Prior authorization and frequency limits vary by plan and product, and Medicare Advantage plans often add rules Original Medicare doesn’t have. Verify benefits and authorization before hookup, because a missed authorization is hard to overturn after the study.

What Diagnosis Codes Support a Holter Monitor Claim?

Symptom and arrhythmia codes on your MAC’s covered list support the claim, such as R00.2 for palpitations, R55 for syncope, R42 for dizziness, and the I48 atrial fibrillation codes. Use the most specific code the chart supports. Payers deny Holter monitor CPT codes when the diagnosis reads like screening.

How Much Does Medicare Pay for a Holter Monitor in 2027?

Medicare multiplies each code’s RVUs by the 2027 conversion factor, $32.6286 for most clinicians, then adjusts for your locality. Our page on the current 93224 Medicare rate shows the 2026 national figure of $70.48 for global 93224. Holter monitor CPT codes reprice each January, so check the 2027 files first.

Who Bills the Technical Component When an IDTF Runs the Monitor?

The IDTF bills the technical codes. Under WPS Article A57476, an IDTF can bill the professional piece only when the interpreting physician is employed or contracted by the IDTF and doesn’t bill the interpretation separately. WPS also requires a letter assigning professional collections to the IDTF, or it denies the professional lines.

Do Extended Patches and MCT Need Prior Authorization?

Not under Original Medicare. Many Medicare Advantage and commercial plans require it for extended patches and MCT, and some extend it to event monitors. A missing authorization comes back as CO-197 in most cases. Check the plan’s current policy before the device ships, since retro approval isn’t guaranteed.

What Is Another Name for a Holter Monitor in Coding Terms?

Coders call it ambulatory ECG, or AECG, monitoring. CPT describes the Holter monitor CPT codes as external electrocardiographic recording up to 48 hours by continuous rhythm recording and storage. MACs file their rules under titles like ambulatory electrocardiographic monitoring or temporary nontherapeutic ambulatory cardiac monitoring devices, so search both names.

Can a Denied Overlap Claim Be Appealed?

At Noridian, no. Noridian states there are no appeal rights for overlapping electrocardiographic monitoring denials, and its system checks Part A and Part B claims nationwide. Other MACs may handle overlaps another way, so check yours. The dependable fix happens at scheduling, when your staff confirms no other monitor or RPM period overlaps.

Sources Used in This Guide

About the Author

Alex Mahone

Alex Mahone is the Sales Director at One O Seven RCM, with more than 12 years of experience in the medical billing and healthcare revenue cycle management field. Through his work with healthcare providers and medical practices, he has developed a strong understanding of the day-to-day challenges involved in billing, collections, and revenue cycle operations. Alex also contributes to the One O Seven RCM blog, where he shares practical insights based on his industry experience to help healthcare professionals better understand medical billing and RCM-related topics.

Recent Blogs

Cardiac Monitoring Claim Denials: Holter Monitor CPT Codes, Event Monitors, and Remote Device Billing for 2027

Stress Test Authorization Denials: How Cardiology Practices Protect Reimbursement

Echocardiogram Claims Underpaid? A Cardiology Practice Guide to 93306, 93308, and 26/TC

Cardiology Billing Audit Checklist: 12 Revenue Leaks in Echo, Stress Testing, and Monitoring

12 Best Medical Billing Companies in Massachusetts (2026): Verified and Compared

Best Medical Billing Companies in Alabama for 2026 and 2027: Compared on Price, BCBSAL, and Medicaid

Book a Consultation